您現在的位置:首頁>>快速門新聞 >> 「雅安快速門」廠房堆積門紅外防砸的接線和調試

                                  「雅安快速門」廠房堆積門紅外防砸的接線和調試

                                  作者:雅安快速門定做   發布時間: 2019/8/20 8:48:06


                                  「雅安快速門」廠房堆積門紅外防砸的接線和調試



                                  Infrared anti-smashing wiring and debugging of Ya'an Express Gate stacking doors


                                   



                                  快速卷簾門簡稱快速門,是現代工業門的一種,由于可以快速的打開和關閉而得名,運用起來十便利,深受各界人士的喜歡。跟著產品技術的不斷老練,在規劃、制造以及安裝周期都已大為的縮短,工作效率得以大幅度進步。



                                  Fast curtain door, short for Fast Door, is one of the modern industrial doors. It is named for its fast opening and closing. It is convenient to use and popular with people from all walks of life. With the continuous sophistication of product technology, the planning, manufacturing and installation cycle has been greatly shortened, and the work efficiency has been greatly improved.



                                  在安裝完快速門之后,都需求進行調試和查驗,檢測門體工作是否順暢,各功用按鍵是否正常,這關系著運用過程中的安全性和實用性,所以這一步很重要。



                                  After installing the fast door, it is necessary to debug and check whether the door works smoothly and the function keys are normal. This is related to the security and practicability in the process of application, so this step is very important.

                                   

                                  雅安快速堆積門





                                  「雅安快速門」廠房堆積門紅外防砸的接線和調試



                                  Infrared anti-smashing wiring and debugging of Ya'an Express Gate stacking doors



                                  在調試快速門時,具體做法如下:



                                  When debugging the fast door, the specific methods are as follows:



                                  一、(絕對值編碼器)上下限位調試檢測:門體停止狀態下,按下上升按鍵,門體向上工作,待通過緩沖、完全間斷后,判斷進步高度是否滿足運用方要求。



                                  1. Upper and lower limit debugging and testing: when the door body is stopped, press the rising button, and the door body works upwards. After buffer and complete interruption, judge whether the progress height meets the user's requirements.



                                  如不滿足要求,再次進行調試;往后,按下降按鍵,待門體下落完全間斷后,查詢門體結束逗留方位是否天然得當。



                                  If the requirement is not met, debug again; then press the drop button, and when the door body falls completely discontinuous, inquire whether the end of the stay position of the door body is natural and appropriate.



                                  二、急停按鈕功用檢測:門體工作過程中,按下急停按鈕,查詢門體是否當即間斷。若依舊正常工作,則需檢查急停按鈕是否失靈或損壞。



                                  2. Function detection of emergency stop button: During the working process of the door body, press the emergency stop button to inquire whether the door body is interrupted immediately. If it still works properly, it is necessary to check whether the emergency stop button is out of order or damaged.



                                  三、自動開啟功能調試:利用車輛、人員移動來仿照實踐狀況,查詢門體是否可以及時打開,以及是否全視點無死角信號掩蓋。



                                  3. Auto-opening function debugging: using the movement of vehicles and personnel to imitate the actual situation, inquiring whether the door body can be opened in time, and whether there is no dead angle signal masking at all viewpoints.



                                  四、紅外防砸功用調試:在門體下落過程中,堵截紅外對射系統,看門體是否會及時反彈上升。



                                  Fourth, infrared anti-smash function debugging: during the falling process of the door body, intercept the infrared counter-fire system, whether the door body will rebound and rise in time.

                                   

                                  成都快速堆積門廠家




                                  在檢驗過程中,要注意自身安全,防止紅外系統失靈構成砸傷狀況。



                                  In the process of inspection, we should pay attention to our own safety and prevent the damage caused by the failure of infrared system.



                                  「雅安快速門」「資陽快速門」「成都快速門」



                                  "Ya'an Express Gate", "Ziyang Express Gate" and "Chengdu Express Gate".

                                   

                                  聯系我們CONTACT US
                                  版權所有:成都龍盛門業有限公司
                                  電話:18624318220
                                  聯系人:童經理
                                  網址:http://www.apintsizedlife.com
                                  查看更多
                                  電話:18624318220(媒體勿擾)    聯系人:童經理
                                  版權所有:成都龍盛門業有限公司
                                  百度地圖 - 網站地圖 -
                                  A篇片在线观看视频