您現在的位置:首頁>>快速門新聞 >> 「德州快速門」堆積門電機速比越大越快嗎?

                                  「德州快速門」堆積門電機速比越大越快嗎?

                                  作者:德州快速門電機批發   發布時間: 2019/6/19 17:10:46

                                   

                                   

                                  「德州快速門」堆積門電機速比越大越快嗎?


                                  Does the motor speed ratio of the Texas Express Gate stacking door increase faster?

                                   




                                  關于快速門電機選用的減速機,我們通常是RV63,1:15的減速機。


                                  Regarding the speed reducer selected by the fast door motor, we usually use the RV63, 1:15 speed reducer.


                                  為什么不用1:10呢,因為,輸出扭矩變小,轉速太高,容易燒電機。


                                  Why not use 1:10, because the output torque becomes smaller, the speed is too high, and it is easy to burn the motor.


                                  比10的速度快相當于車的二擋 ,比15的速度慢相當于一檔, 二擋速度快,一檔速度慢,一檔力氣大


                                  Speed faster than 10 is equivalent to second gear, slower than 15 is equivalent to first gear, second gear is faster, first gear is slower, first gear is more powerful.

                                   

                                   

                                  德州快速門電機




                                  有的門帶不動了,換一個速比的減速機就行了,但是速度慢了一些 ,15的帶不動換20的還有30的。


                                  Some doors can't move, just change a speed ratio reducer, but the speed is slower, 15 can't move 20 and 30.


                                  「德州快速門」堆積門電機速比越大越快嗎?



                                  Does the motor speed ratio of the Texas Express Gate stacking door increase faster?


                                  速比就是你電機額定的轉速除以實際轉速得出來的,比喻說你電機額定轉速是1400轉,速比為10的話。


                                  Speed ratio is derived by dividing the rated speed of your motor by the actual speed. It means that the rated speed of your motor is 1400 rpm and the speed ratio is 10.


                                  那么你的電機實際轉速就是140轉/分鐘。速比越大,轉速越低,同時輸出力越大。


                                  Then the actual speed of your motor is 140 rpm. The higher the speed ratio, the lower the speed and the greater the output force.


                                  減速機的減速比(亦稱為傳動比)速比就是你電機的額定轉速除以實際轉速得出來的。


                                  The speed ratio of the reducer (also known as the transmission ratio) is the rated speed of your motor divided by the actual speed.

                                   

                                  成都快速門電機批發



                                  計算方法 :


                                  Computing method:


                                  設:電機額定功率為P (kw),轉速為n1 (r/min),減速器總傳動比i,傳動效率u。 則:輸出轉矩=9550*P*u*i/n1 (N.m)


                                  Setting: The rated power of the motor is P (kw), the speed is N1 (r/min), the total transmission ratio of the reducer is i, and the transmission efficiency is u. Then: output torque = 9550*P*u*i/n1 (N.m)


                                  1、定義計算方法:減速比=輸入轉速÷輸出轉速。


                                  1. Define calculation method: deceleration ratio = input speed_output speed.


                                  2、通用計算方法:減速比=使用扭矩÷9550÷電機功率電機功率輸入轉數÷使用系數,MB無級變速機的使用注意事項。


                                  2. General calculation method: deceleration ratio = use torque_9550_motor power input speed_use coefficient, MB CVT use precautions.


                                  3、齒輪系計算方法:減速比=從動齒輪齒數÷主動齒輪齒數(如果是多級齒輪減速


                                  3. Gear system calculation method: deceleration ratio = number of driven gear teeth, number of active gear teeth (if multi-stage gear deceleration)


                                  那么將所有相嚙合的一對齒輪組的從動輪齒數÷主動輪齒數,然后將得到的結果相乘即可,NRV減速機。


                                  Then the number of driven gear teeth of all pairs of meshing gears is equal to the number of active gear teeth, and then the result is multiplied, NRV reducer.


                                  4、皮帶、鏈條及摩擦輪減速比計算方法:減速比=從動輪直徑÷主動輪直徑,螺旋齒輪減速機,擺線針輪減速機如何加潤滑油。


                                  4. Calculating method of belt, chain and friction wheel deceleration ratio: deceleration ratio = driven wheel diameter_drive wheel diameter, helical gear reducer, cycloid pinwheel reducer how to add lubricant.


                                  用戶們,如果您有快速門電機、減速機等配件的采購和維修需求,歡迎撥打13940183063。


                                  ustomers, if you have the purchase and maintenance needs of fast door motors, reducers and other accessories, please call 13940183063.

                                  聯系我們CONTACT US
                                  版權所有:成都龍盛門業有限公司
                                  電話:18624318220
                                  聯系人:童經理
                                  網址:http://www.apintsizedlife.com
                                  查看更多
                                  電話:18624318220(媒體勿擾)    聯系人:童經理
                                  版權所有:成都龍盛門業有限公司
                                  百度地圖 - 網站地圖 -
                                  A篇片在线观看视频